Latest 150W High Power LED Road Light

Basic Info

Model No.: 150W LED Street Light

Power Supply: AC

Color Temperature: Warm White

Lamp Body Material: Aluminum

Power: 60-100w

Application: Square, Highway, Garden

IP Rating: IP66

Certification: CE, EMC, LVD, RoHS

Input Voltage: 220v

With Light Source: With Light Source

LED Chips Brand: Philips Lumileds

CRI: >75Ra

Luminous Flux: 100-110lm/w

Life Span: 50000 Hours

Warranty: 5 Years

Material: ADC12 AL+PC

Beam Angle: 140°* 60°

Size: 566*290*97mm

Items: 150W LED Street Light

Surge Protection: 10KVA

Driver: MEANWELL HLG-150H-48A No Flicker

Additional Info

Packaging: Foam + Paper Carton, Export Standard

Productivity: 10000pcs/Quarter

Brand: AD Commercial, OEM or ODM available

Transportation: Ocean,Land,Air

Place of Origin: China

Supply Ability: 10000pcs/Quarter

HS Code: 9405409000

Port: Shenzhen Port,Shekou Port,Yantian Port

Product Description

Latest 150W High Power LED Road Light

This 2018 new LED Street Light is popular with many countries and areas for its special housing and long life time. This LED Street light housing though high pressure casting , proceeded by painting ,solid an corrosion resisting. For the heat dissipation, all aluminum housing as a heat sink, greatly extends the life span of lighting source.

Product Parameter

Product Advantages: 

LED Street Light

1.Environment friendly
2.Philips 3030 LED, high efficiency
3,Aluminum heat sink, Good dissipation
4,Wide input voltage.
5,High transmittance lens
6, Front designed driver,maintain conveniently
7, Treated by a new technology,  housing is colorfast.
8,>50,000 hours using life span
9, 5 years warranty, super low maintenance cost.

10,Ultra thin design , convenient for storage, transportation and maintenance.

Product Show                                                                          

Install Caution

Please carefully read the operating instructions before using the products.
Please cut off the power supply before installation.

1, Open the packing, take out the lamp, open the power cover, and unscrew the M10 screw on the bracket, as shown in the picture:

2, Insert the pole into the lamp and lock the screws on both sides of the lamp. Fix the lamps on the pole. Connect the cable with the city electricity, pay attention to the distinction between the fire line, the zero light and the ground wire (the electric power should be cut off in advance when the connection is connected) as shown in the picture.

3, Close the driver cover

Application

Highway,Garden,Road, Community,District, Square, outdoor,etc.

OEM available,Other brand LED and driver prices please contact customer service representative.